Bronco Models
WWII British Airborne Weapon & Equipment Set
Bronco Models 1:35 Scale Kit No. AB3567
Page 2 of 2
backnextBronco Models
Welbike and CLE

Build images
The front forks added to the front wheels, the top was glued to the tyre for added strenght.

Bronco Models

Engine assembly: The left frame with assembled engine ready for fitting together, note the engine pin and the corresponding locating notch on the frame noted (1). The engine and chain/rear hub added to the left frame (2). The seat post and rear wheel guard added to the right frame prior to fitting the rear wheel and the frames together (3), fitting these to the frames and allowing to dry completely makes fitting the frames together easier is easier as you don’t have to worry about lining all these parts up at once.

The rear wheel fitted in place ensuring this is perfectly aligned with the frame before the glue dries, also note the rear wheel guard etched supports fitted before adding the wheel (4). The two frame halves fitted together ready for the remaining parts to be fitted (5).

Bronco ModelsBronco Models
Bronco ModelsBronco Models
Bronco Models

Images of the completed bike with the remaining parts added as per the review text, there were no real problems fitting any of the parts apart from the small size requiring care when removing from the sprues and in fitting. Note the brake and accelerator cables and engine wiring still need to be added as illustrated in the instructions.

Bronco ModelsBronco Models
Bronco ModelsBronco Models


backnext



Back to Top