PMMS
Karaya
Tiger I Late Track Links
Karaya 1:35 Set No. MTR-02
Review by Terry Ashley

Karaya have released their second set of workable metal track links for the Tiger I Late production kits following the early track set (MTR-01) and includes 200 individual links cast in ZnAl alloy with a long length of stiff copper wire to be cut up for use as the track pins.

Metal track links with track pins cut from wire provided
Karaya
The details on the links is excellent with very well defined rib details and cleats on the face with just some minor excess metal around the open guide tooth lightening holes which is easily removed with an old hobby knife. There is also a single shallow ejector pin mark and minor casting seam on the back of each link which should be easy to remove with light filing.

Assembly is quite straightforward with you firstly cutting the wire provided into 19.5mm (3/4in) lengths using a pair of fine wire clippers and simply fitting the links together by inserting the wire into the pre-drilled pin holes. By adding a small bend at the end of each wire pin will hold the pin in place when pushed all the way into the links and no glue was needed with the assembled track runs being very robust due to being all metal.

Track assembly, note bend in end of wire pin to hold in place without glue
when pushed into place

Karaya

The assembled track runs fitted perfectly to the AFV Club kit #AF35079, the Dragon kit #6253 drive sprockets and to the Tamiya Tiger I kits drive sprockets test fitted without modification and due to the weight gives a very natural and realistic track sag over the road wheels. Also you can get a very realistic finish to the track after painting by lightly sanding the links to expose the metal where natural wear would occur.

KarayaKaraya
Track links around the AFV Club drive sprocket
KarayaKaraya
Track links around the Dragon drive sprocket
KarayaKaraya
Track links around the Tamiya drive sprocket
KarayaKaraya

Conclusion:
Another nicely detailed set of track links with minimal cleanup and very easy assembly to provide natural track sag due to the weight of the metal tracks that fits to different kit drive sprockets without modification.

Highly recommended

Thanks to my Credit Card and the excellent service from Accurate Armour for the track set.
Or check out the Karaya website for the full range of products.



Page created October 14, 2005

Click Browsers BACK button to return to list
Home / Reviews / Vehicle Reviews / Karaya