Universal Carrier Mk.I w/Crew
Riich Models 1:35 Scale Kit No. RV35011
Page 5 of 5
Tow cable assembly, you will need two pairs of stout needle point tweezers to best deal with the very small parts (left).
1. Clip the cable eye and hook into the U bolts.
2. Bend open the etched rings.
3. Slip the chain link and the U bolt onto the opened etched ring.
Note; the chain uses 14 links per length.
4. Close up the etched ring to finish the assembly and repeat for the other linkages.
Assembled tow cable and chain and close-up of one linkage assembly.
Radio Operator figure.
Gunner figure.
Driver figure.
Figures fitted into vehicle, Note the radio is about 1mm further forward than indicated in the instructions
and the engine compartment grab handle is not fitted.
The Driver posed outside the vehicle as he must be fitted during construction and won't fit afterwards.