Multiple Gun Motor Carriage M16
Trumpeter Kit No. 00911
1:16th Scale
Detail Images
Bogie parts
Initial bogie housing assembly
showing the join seams that need to be eliminated all around.
Bogie housing with join seams filled and the hole with lip added to the bogie support unit as per text.
Note also the return roller bolt heads still to be added as they are only represented by the bracket pins.
Images showing the actual bogie housings, note round hole to be added on the lower housing.
Note the top left image has the same casting numbers as the kit bogie but lacks the other details shown in the image.
Views of the bogies, drive sprockets and idlers added to the chassis.
Note the exhaust bracket is still to be added
Image of actual exhaust bracket
Under side views of the bogies, note the cross tube had to be shortened by about 2mm (1mm off either end)
to fit properly between the bogie supports.
