Multiple Gun Motor Carriage M16
Trumpeter Kit No. 00911
1:16th Scale
Drive Sprocket detail images
Drive sprockets parts
Note the incorrect alignment of the drive teeth due to the square notch being in the wrong position.
You have to enlarge the cutout in the tooth disc to allow the teeth to line up correctly with the rim cut-outs.
Care is needed when fitting the two sprockets together as they can easily be attached with
the wrong alignment of the many cut-outs due to there being nothing to indicate the correct alignment.
Assembled drive sprockets
There are large pin marks between the outer sprockets ribs that are very difficult to deal with.
Real drive sprockets, note alignment of the drive teeth and rim cut-outs as mentioned above.
Images of actual idlers courtesy of Toadman's M2 Halftrack Photo CD