Each set has ten sprues with three different sized rivets/bolts on each sprue for a total 80 of each size.
Using the bolts/rivets is easy, take a sharp scalple blade and gently 'slice' the bolt/rivet required from the sprue, do this slowly so they don't simply take off into the void.
Before attaching to the model it's best to use a soft pencil and mark out the location of the bolts and attach each with a small dab of liquid cement.
A useful accessory that will find many uses when adding details to your models.
Thanks to M&Models for the review samples.
Page created 9 June 2004