Cromwell Mk.VI CS with hull type F
SKP Model 1:35 Scale Kit No. 099
Running Gear details
Views showing the inside face ejector pins to be removed from the road wheels, before (left) after (right)
Images of the outer face of the cleaned wheels and the Tamiya poly cap added,
note this has to be cut in half depth wise due the hole being tapered in the SKP wheel.
Similar inside face ejector pins to be removed from the idler wheels, before (left) after (middle) and cleaned up idlers (right)
Again the Tamiya poly cap hole is included should you wish to utilise this?
Views of assembled road wheels and idlers, watch the hub cap bolt alignment when fitting to the wheel hub
As there is no locating lug to ensure correct alignment.
Resin drive sprockets with Tamiya parts for comparison, careful cleanup of the resin film in the lightening holes is required.
The Tamiya poly cap added to the SKP sprocket and the inner sprocket discs and the inner discs added to the sprockets (right).
Axle mould seams cleanup